Home / Services / Gate automation

Gate motors, installed to last

A new motor on a gate that runs freely, a rack that meshes, a cage that keeps thieves off it and a battery that carries it through load-shedding. That is the whole job, and we do all of it.

Sliding and swing

Motor, rack, cage and beams as one job

We check the gate first: does it run freely, is the track straight, is the rack worth keeping. Then we fit the motor, a new drive rack where needed, a theft-resistant cage and safety beams, sets the limits and tests it with you. You get remotes coded and a demonstration of the manual release.

Centurion slidingD2, D3 Smart, D5 Evo, D5 Evo Smart, D6 Smart, D10 Smart, D20 Smart
ET slidingET Drive 300, 500, 600 and 1000 (up to 1,000 kg) with ET Blu-Mix rolling code
SwingCenturion R6 and Vantage 400/500 linear operators
SecurityCenturion anti-theft brackets for D2, D5 Evo and D5 Smart; cages
PartsCenturion CP80 boards, gate wheels, wheels in casing, 2 m racks
PowerBattery and charger, solar where needed

Replacing an old motor

Swap a tired or stolen motor without starting over

An old or stolen motor can usually be replaced on the existing gate and track. We tell you what can stay and what is worn, so you only pay for what is needed.

  • Like-for-like or upgradeOlder motors swapped for current Centurion models.
  • Stolen motorsReplaced and caged so it does not happen twice.
  • RemotesOld remotes cleared, new ones coded.

Questions

Before you ask

My gate will not open in a power cut. Why?

Almost always the battery. Gate motor batteries wear out after a few years, sooner with a lot of load-shedding. We test it, replace it if needed and check the charger so the next one lasts.

Can you repair a motor or gate someone else installed?

Yes. Most call-outs are exactly that: a flat battery, a worn wheel, a bent rack, beams out of line or limits that need resetting. We check the whole gate before replacing anything.

Which motor should I get?

It depends on the gate's weight, length and how often it opens. For most homes a Centurion D5 Evo is plenty; heavier or busier gates suit a D10 Smart; swing gates use the R6. We recommend one after seeing the gate.

Need a new gate motor?

Powered byCloudforge